State licensing

If you are looking for state specific construction contractor exam study material, please refer to:

http://statelicense.examreview.net/

 

 

Certified Elevator Technician Exam Review Questions & Answers 2016/17

Certified Elevator Technician Exam Review Questions & Answers

Self-Practice Exercises focusing on the technical knowledge of the elevator trade

We create these self-practice test questions module referencing the technical concepts currently valid in the CET elevator exam. Each question comes with an answer and a short explanation which aids you in seeking further study information. For purpose of exam readiness drilling, this product includes questions that have varying numbers of choices. Some have 2 while some have 5 or 6. We want to make sure these questions are tough enough to really test your readiness and draw your focus to the weak areas.

The CET exam is comprehensive. Topics include Electric/Traction, Hydraulic, Special Application, Escalators, Lifts, Controls, Job Site, Hoistway, Car Enclosure, Maintenance and Safety. No single study product can cover everything found in the exam, and it is recommended that you use this product together with other study resources for the best possible exam prep coverage.

Order link: https://www.amazon.com/dp/1523470178

 

        

 

 

QEI Certification Exam For elevator inspectors Review Questions & Answers 2016/17

QEI Certification Exam For elevator inspectors Review Questions & Answers 

Self-Practice Exercises focusing on the technical knowledge of the elevator trade

We create these self-practice test questions module (with 130+ questions) referencing the technical concepts currently valid in the QEI elevator inspector exam. Each question comes with an answer and a short explanation which aids you in seeking further study information. For purpose of exam readiness drilling, this product includes questions that have varying numbers of choices. Some have 2 while some have 5 or 6. We want to make sure these questions are tough enough to really test your readiness and draw your focus to the weak areas.

The QEI exam is comprehensive. A lot of topics related to elevator, electronics and safety are tested. No single study product can cover everything found in the exam, and it is recommended that you use this product together with other study resources for the best possible exam prep coverage.

        

 

Study Notes and Self-Practice Review Questions for Certified Cost Technician CCT Exam

CCT Exam ExamFOCUS Study Notes and Self-Practice Review Questions for Certified Cost Technician 2018/19 Edition

A CCT is one who is proficient in the basic skills and knowledge of total cost management. It is just like a junior version of CCP.

You may think of cost engineering as an adjunct of traditional engineering. The key objectives of cost engineering are: 1, to arrive at accurate cost estimates; and 2, to avoid cost overruns. Cost engineering encompasses a wide range of cost-related aspects of engineering management. Keep in mind, awareness of the related costs is a key factor in making the proper choice of engineering approaches to take. Although the cost engineering exam focuses primarily on the various cost analysis and estimation techniques, basic background knowledge of certain “business management” related disciplines will definitely help for those who have little experience on topics outside of the scope of traditional engineering. To be honest, without possessing solid knowledge on these topics a candidate will have a very tough time mastering the skills of cost engineering. This is especially true when the TCMF (Total Cost Management Framework) methodology is in place to integrate Asset, Operations and Project Management into a single model.

We create this study book product referencing the concepts and principles currently valid in the exam. Each practice question comes with an answer and a short explanation which aids you in seeking further study information. For purpose of exam readiness drilling, this product includes questions that have varying numbers of choices. Some have 2 while some have 5 or 6. We want to make sure these questions are tough enough to really test your readiness and draw your focus to the weak areas. Think of these as challenges presented to you so to assess your comprehension of the subject matters. The goal is to reinforce learning, to validate successful transference of knowledge and to identify areas of weakness that require remediation. The questions are NOT designed to “simulate” actual exam questions. “realistic” or actual questions that are for cheating purpose are not available in any of our products.

This product includes both study notes and self practice questions in MC format.

Order Link: https://www.createspace.com/8402164

Study Notes and Self-Practice Review Questions for Certified Scheduling Technician 2018/19 Edition

CST Exam ExamFOCUS Study Notes and Self-Practice Review Questions for Certified Scheduling Technician 2018/19 Edition

A CST is an entry level professional who is proficient in the general skills and knowledge of the scheduling process within the Total Cost Management TCM framework. You can think of a CST as a junior version of PSP. The scheduling exam places particular focus on the scheduling aspect of a construction project.

We create this study book product referencing the concepts and principles currently valid in the exam. Each practice question comes with an answer and a short explanation which aids you in seeking further study information. For purpose of exam readiness drilling, this product includes questions that have varying numbers of choices. Some have 2 while some have 5 or 6. We want to make sure these questions are tough enough to really test your readiness and draw your focus to the weak areas. Think of these as challenges presented to you so to assess your comprehension of the subject matters. The goal is to reinforce learning, to validate successful transference of knowledge and to identify areas of weakness that require remediation. The questions are NOT designed to “simulate” actual exam questions. “realistic” or actual questions that are for cheating purpose are not available in any of our products.

This product includes both study notes and self practice questions in MC format.

Order Link: https://www.createspace.com/8402160

Principles and Practice of Surveying NCEES Examination Review Questions and Answers

Principles and Practice of Surveying NCEES Examination Review Questions and Answers LATEST Edition

A Self-Practice Exercise Book covering the relevant laws, legal concepts and principles.

You want to know that the NCEES closed-book exam has the following major section:

Legal Principles 26%
A. Common/case law boundary principles
B. Sequential and simultaneous conveyances
C. U.S. Public Land Survey System
D. Controlling elements in legal descriptions
E. Riparian and littoral rights
F. Property title issues (e.g., encumbrances, interpretation, deficiencies)
G. Sovereign land rights (e.g., navigable waters, eminent domain)
H. Prescriptive rights/adverse possession
I. Easement rights
J. Parol evidence

*** The focus of this product is on the relevant laws, legal concepts and principles. ***

We create these self-practice test questions module (with 120 questions) referencing both legal principles and surveying standards currently valid in the trade. Each question comes with an answer and a short explanation which aids you in seeking further technical information. For purpose of exam readiness drilling, this product includes questions that have varying numbers of choices. Some have 2 while some have 6 or 7. We want to make sure these questions are tough enough to really test your readiness and draw your focus to the weak areas. You should use this product together with other study resources for the best possible exam prep coverage.

        

 

 

 

Fundamentals of Surveying NCEES Examination Review Questions and Answers

Fundamentals of Surveying NCEES Examination Review Questions and Answers LATEST EDITION

A Self-Practice Exercise Book covering Geodesy, GIS as well as Survey Law, Processes and Methods

The FS exam is the first step leading to license as a surveyor. The computer based exam covers a wide range of topics. This product covers Geodesy, GIS as well as Survey Law, Processes and Methods (knowledge domain 6,7, 9 and 10).

We create these self-practice test questions module (with 100 questions) referencing the latest knowledge standards currently valid in the trade. Each question comes with an answer and a short explanation which aids you in seeking further technical information. For purpose of exam readiness drilling, this product includes questions that have varying numbers of choices. Some have 2 while some have 6 or 7. We want to make sure these questions are tough enough to really test your readiness and draw your focus to the weak areas. You should use this product together with other study resources for the best possible exam prep coverage.

        

Commissioning Professional Exams 2014

Commissioning Professional Exams ExamFOCUS Study Notes on Commissioning Process & Planning 2014
for candidates taking these exams: CxA, CBCP, CCP, CxP

This book focuses on the knowledge domain of commissioning process and planning. This knowledge domain is an important one that can be found in all of the commissioning professional exams. Generally speaking, you should:

– know the different roles and responsibilities in the entire commissioning process.
– know the deliverables to be expected at each stage or phase.
– know how to maintain objectivity under different arrangements.

Different exam bodies may have slightly different terminologies and methodologies for the commissioning activities. However, the overall guiding principles and applications are almost always the same. This book focuses on vendor neutral commissioning knowledge. Depending on the exam you take, vendor specific information may be tested. You should therefore prepare accordingly.

Book TOC: PRINTEDCommissioning-2014UPDTOC

 

Architect Registration Examination ARE 4.0 2014

Architect Registration Examination ARE 4.0 ExamFOCUS Study Notes & Review Questions 2014: Focusing on the CODES & REGULATIONS / MATERIALS & TECHNOLOGY sections of the Building Design & Construction Systems division

According to the NCARB, the registration of architects is a means by which U.S. registration boards and Canadian provincial and territorial associations fulfill their mission to safeguard public health, safety, and welfare. The exam consists of seven divisions, and this product covers the CODES & REGULATIONS / MATERIALS & TECHNOLOGY sections of the Building Design & Construction Systems division. This section deals with the impact of design decisions in the selection of systems, materials, and methods on building design and construction.

To succeed in the exam, you need to read as many reference books as possible. There is no single book that can cover everything! The ARE exam is a comprehensive one which is far from being easy! There are both MC questions and Graphical questions. This ExamFOCUS book focuses on the more difficult topics that will likely make a difference in exam results. The book is NOT intended to guide you through every single official topic. You should therefore use this book together with other reference books for the best possible preparation outcome.

Book TOC: PRINTEDARE-2014UPDTOC

        

AIC LEVEL-1 ASSOCIATE CONSTRUCTOR 2014

AIC LEVEL-1 ASSOCIATE CONSTRUCTOR Certification Exam ExamFOCUS Study Notes & Review Questions 2014: Focusing on Engineering Concepts, Management Concepts, Safety, Contract Administration and Project Management

The AIC Level 1 examination is a two-part written examination with 300 multiple-choice questions and several writing samples, involving a total testing time of 8 hours! It covers a wide range of fundamental topics but this study notes will focus on these areas:

Management Concepts, and Project Management / Contract Administration
Engineering Concepts, and Safety

Engineering Concepts is a domain that concentrates on topics such as the properties of engineering materials, soil mechanics, concrete formwork design and applied mechanics, air mechanics and fluid mechanics. We combine these information with Safety because they share common principles and both of them carry heavy weight in the exam. Management Concepts, on the other hand, covers things such as contract formation principles, types of business entities, accounting principles and financial ratios, management systems and business ethics. We also include coverage on Project Management and Contract Administration.

To succeed in the exam, you need to read as many reference books as possible. There is no single book that can cover everything! This ExamFOCUS book focuses on the more difficult topics that will likely make a difference in exam results. The book is NOT intended to guide you through every single official topic. You should therefore use this book together with other reference books for the best possible preparation outcome.

Book TOC: PRINTEDaiclevel1-2014UPDTOC